Fort Products

Rempro Thermal Paint 1 Litre – Premium Anti-Mould & Anti-Condensation Wall Treatment with Glass Bubble Technology (Textured)

SKU : FNSKU-REMACP1

ASIN: B07B677LG6

As low as£27.29

Quantity:
Total Price:
  • BLACK MOULD PREVENTION – Rempro Thermal Paint is a specialist anti-condensation paint to stop mould and dampness caused by condensation. Our thermal paint can be used in various applications where condensation can create problems where moisture forms and is perfect for cold walls, ceilings and humid areas such as bathrooms and kitchens.
  • MICROSPHERE TECHNOLOGY – Contains glass microspheres designed to maintain surface temperatures on treated substrates; this increases the dew point compared to an ordinary emulsion, reducing the chance of condensation forming. Rempro paint can be used on most surfaces, such as painted/wallpapered walls and ceilings, new and old plasterwork, brickwork, concrete, galvanised steel and most paintable plastics.
  • UNIQUE ANTI-CONDENSATION PAINT – Unlike other anti-mould or anti-condensation paints which contain biocides or simply only absorb moisture, Rempro anti-condensation paint can be overpainted and is an ideal solution for cold, exposed walls or areas where insulation may be missing or inadequate.

Description

Available in 1 Litre – Suitable for Long Lasting Protection Against Salts in Masonry

45a991a4 7414 4634 82f9 12b5874e08b1. CR0,0,350,175 PT0 SX350 V1
319eb1d9 6528 43ae a2df a33856a7c835. CR0,0,300,400 PT0 SX300 V1
d8041de5 4070 440f a986 8d8939ecca90. CR0,0,970,600 PT0 SX970 V1

Rempro Thermal Paint

Rempro is a thermal anti condensation paint designed to stop mould and damp by resisting the formation of condensation and mould on internal wall and ceiling surfaces. As condensation takes much longer to form compared to other paints, mould won’t grow.

Rempro Anti Condensation Paint is a water based internal emulsion which will drastically reduce condensation formation by utilising Glass Microsphere technology. When incorporated into a paint film glass spheres act as miniature thermos-like bottles, providing a thermal barrier between cold surfaces and the warmer ambient temperature within a living space. As the air is insulated against the colder wall surface, condensation is controlled. This in turn inhibits mould and fungal growth.

Walls painted with Rempro thermal anti condensation paint feel warmer to the touch as the heat from your hand is being reflected back instead of being drawn to the colder surface of the wall and escaping. The same principle can be applied to warm air from heating systems. Surfaces that have been coated with Rempro thermal anti condensation paint will help reduce heat loss due to the coatings ability to block heat transfer.

Colours available – White

Sizes available – 2.5 Litre, 5 Litre, 10 Litre, 25 Litre

Coverage after 2 coats – Approximately 4-5m² per litre

Preparation

Surfaces should be clean, dry and free from grease and dirt. Remove all loose and defective paint. Lightly abrade glossy areas with abrasive paper. Avoid inhalation of dust. Wear a suitable face mask when dry sanding. Treat any visible mould with Rempro Mould Treat Spray. Please refer to separate information sheet on this product).

8b2f4eae 84fc 45d9 8b3d 84dd9ac7fe22. CR0,0,970,600 PT0 SX970 V1
81sW8+l5UiL. AC SL1500
Instructions for use

  • Ensure the area is well ventilated
  • Stir gently and thoroughly before use.
  • DO NOT use a powered mixing paddle
  • Application temperature between 5-25°C
  • 2 coats required
  • Optimum dry film thickness is 200 microns
  • The product should be touch dry after 2 hours depending on humidity and temperature
  • Recoat after 4 hours. Allow for extra drying time in cold and wet weather conditions
  • For best results, use a medium pile roller. Can also be brush applied
  • Over paint with a standard emulsion to achieve a smoother finish. You can also apply wallpaper over this coating
  • Internal use only on walls and ceilings. Can be applied to block, brick, render and plaster
  • New plasterwork should be allowed to dry completely before applying Rempro Thermal Paint

Technical Details

Manufacturer

‎Fort Products Limited

Part Number

REMAPC

Product Dimensions

30 x 23 x 23 cm; 950 g

Item model number

REMACP1

Size

‎1 l (Pack of 1)

Colour

White

Finish

Eggshell

Material

water based

Item Package Quantity

1

Coverage

1

Special Features

Non Toxic

Usage

Prevention of black mould caused by condensation

Included Components

1 x Rempro Thermal Paint 1 Litre - Anti Mould and Anti Condensation Insulating with Glass Bubble Technology (Textured)

Batteries included?

No

Batteries Required?

No

Item Weight

950 g

ASIN

B07B677LG6

Product Safety

  • Contains rm 3-iodo-2-propynyl butylcarbamate, glutaraldehyde. May produce an allergic reaction.
Please login to post questions
Fort Products

ABOUT FORT PRODUCTS®

Fort Products is an established UK Based manufacturer and seller specialising in a range of amateur and professional products for the pest control and remedial repair industry. Our experience commenced in 1996 within the pest control industry before leading to this eBay shop in 2003, and we pride ourselves on the technical knowledge received in the last 25+ years.