Description
Rempro Salt Neutraliser
Rempro Salt Neutraliser
Rempro Salt Neutraliser is an aqueous surface treatment, specifically developed to overcome the problem of white salts on mineral building surfaces from new render to old stone. Can be used on brickwork and masonry before the application of render as part of a damp proof course.
An aqueous surface treatment, specifically developed to overcome the problem of white salts on mineral building surfaces from new render to old stone.
Brush away or remove all loose surface salts and thoroughly soak the affected area with clean tap water. Apply Salt Neutraliser treatment by brush or roller to areas showing salts contamination.
On new plasterwork or light salting use salt neutraliser diluted with 1:1 with water
- Neutralises the action of salts to reduce efflorescence
- Approximately 1 litre covers 10 square meters depending on the substrate
- Non-toxic, non-hazardous, solvent and plasticiser free
- Suitable prior to tanking
Size 1 litre & 5 litres
Coverage 1 Litre concentrate treats 5 to 10m2.
Directions for use
- Brush away or remove all loose salts.
- Thoroughly soak the affected area with clean tap water.
- Apply salt Neutraliser by brush or roller to areas showing salts contamination.
Under most circumstances one coat or application will be adequate.
a) Where heavy salting on old brickwork is being treated use Salt Neutraliser as the concentrate (container strength).
b) On new plasterwork or light salting use Salt Neutraliser diluted with water up to 50/50 dilution rate. - Some frothing may occur which is due to the reaction with the salts. Allow some time for the neutralising action to be completed. A white deposit may be left on the surface where original efflorescing has taken place and is sometimes difficult to remove.
- If re-decorating is to be applied on the treated surface the area should be washed with water and allowed to dry. Do not redecorate at any time until the treated areas are thoroughly dry.
