Description
NYLON PLASTIC NET HOOKS FOR BIRD CONTROL
Product description
Repair hooks for fast closing of damaged wire
Birdgo 100 Nylon Plastic Net Hooks for Bird Control Netting Fixing, Access & Repair Solution
ASIN: B07KX4CX4J
As low as£9.99
- NET ACCESS & REPAIR – Birdgo net hooks are commonly used within the professional pest control industry as a fast way to create access into bird netting or when netting requires temporary repair. The ‘S’ type clips allow easy attachment and securely holds bird netting closed.
- WIRE ATTACHMENT – An alternative use of our net hooks is attaching nets to a wireframe. This type of installation has the significant advantage of removing the netting without damaging the net and are a recommended attachment method for balconies and other temporary netting solutions.
- NYLON PLASTIC – Net hooks are manufactured from UV-stabilised nylon plastic and suitable for external installations. The hooks can be used on all net sizes, including 19mm, 28mm, 50mm and 75mm. Supplied in packs of 100.
Technical Details
Package Dimensions
22.8 x 15.8 x 1.3 cm; 56 g
Part number
HOOK-TWINE
Material type
Plastic
Manufacturer
Seahaven Limited
Manufacturer reference
HOOK-TWINE
ASIN
B07KX4CX4J
Please login to post questions
ABOUT FORT PRODUCTS®
Fort Products is an established UK Based manufacturer and seller specialising in a range of amateur and professional products for the pest control and remedial repair industry. Our experience commenced in 1996 within the pest control industry before leading to this eBay shop in 2003, and we pride ourselves on the technical knowledge received in the last 25+ years.
Shop NowBirdgo 10 x 90mm Pigeon Post & Pad Kit – Support Posts for Bird Wire Prevention Installations on Fencing & Non-Drill Surfaces
As low as£16.29- NO-DRILL SUPPORT FOR BIRD WIRE – The components included within this kit are used to support bird wire systems when drilling is not a viable option. Pads can be used with an adhesive to surfaces such as aluminium capping or screws for timber surfaces. They are a quick and convenient solution for installing bird wire in sensitive areas and are widely used within the professional pest control industry.
- POST & PAD INSTALLATION – For pigeon prevention on a standard ledge, we recommend a height of 90mm for the front leading edge and 130mm for additional intermediary rows; when possible a minimum of 2 rows should be installed. Pads can be installed using screws or with a suitable flexible adhesive such as Soudal Fix All Crystal. Spacing between sections should be no more than 1.5m, and the system should be installed with a spring under light tension only.
- IMPORTANT PAD INFORMATION – Fixings are not included within this kit. Post and pad installations are specifically designed for light perching of pigeons only and should not be used in areas where pigeons are active overnight. If using adhesive, the installers must best prepare the attachment area; we recommend using a surface cleaner to remove any grease or oils on the application area.
- Shop Now
Birdgo 10 x Standard Stainless Steel Springs for Bird Post & Wire Ledge Control Systems – Keeps Pigeon Wire Under Tension
As low as£6.29- SPRINGS FOR POST & WIRE SYSTEMS – Birdgo stainless steel springs are made specifically for tensioning wire between posts on an anti-pigeon control system. The springs firmly hold the wire under tension, allowing for flexibility and sagging in temperature fluctuations and wire movement by determined birds. Without springs in place, the bird wire system will lose tension over time, failing to deter unwanted birds.
- INSTALLATION OF SPRINGS – Springs are a critical component in installing bird wire systems, and every run section should contain at least 1 spring. The spring should be attached directly to the post whilst the other end to the wiring system and held firmly using a bird wire crimp. Springs should be placed under tension when installing the wire.
- IMPORTANT CRIMP INFORMATION – The springs are manufactured from high quality 316 stainless steel. Springs are suitable for pigeon wire installations only. Springs should be installed under tension to allow the 0.7mm wire to remain rigid; the only exception is when using surface pads installed with adhesive where light tension only should be used.
