Rempro
Categories
Showing 10–16 of 16 resultsSorted by popularity
Shop NowRempro 100 x Terracotta DPC Damp Proofing Injection Wall Plugs
As low as£10.79- Professional quality 10mm-12mm plugs for use after injection of DPC cream.
- Use as an alternative to plugging with sand and cement.
- Easy to apply after installation of damp proof course.
- Available in Terracotta.
- Shop Now
Rempro 1Ltr Mould Treat Wall & Ceiling Preparation Treatment Spray – Mould Killer
As low as£13.49- Professional quality spray for the removal of black mould before painting
- Use in conjunction with our Rempro paint additive
- Shop Now
Rempro 200 x DPC Damp Proofing Injection Wall Plugs | Universal 10mm-12mm Holes | Prevent Leakage of Cream
As low as£17.29- DPC INJECTION PLUGS – Our wall plugs are used when installing damp proof cream into masonry walls or fungicides into timbers. The DPC plugs can easily be inserted into the hole after injection of the cream to create an excellent seal to prevent product leakage. The plugs can be fitted into 10mm or 12mm holes.
- SAND CEMENT ALTERNATIVE – Wall plugs are an excellent alternative to plugging holes with sand & cement, which often can not match the existing colour of the injection area; this allows for a speedy installation and clean, professional finish.
- APPLICATION RATE – Quantity required will vary depending on treatment use. For our Rempro DPC injection cream, 100 plugs will cover approximately 10-12 meters or 2.5 400ml cartridges. We have pack sizes available in 100, 200, 500 & 1000.
- Shop Now
Rempro 1 x 400ml DPC Damp Proofing Course Cream – Barrier Treatment & Control of Rising Damp in Walls – BBA Certified
As low as£14.99- STOP RISING DAMP – Rempro DPC Cream is an advanced silicone emulsion cream specifically used to control rising damp in all types of masonry walls within properties. Once the cream has been injected into the wall, an effective physical barrier is created to prevent the effects of rising damp, typically known as a damp proof course.
- BBA CERTIFIED – This product has been extensively tested and approved by the BBA (British Board of Agrement) for use within both new and existing properties. The certification is a vital ingredient for acceptance with specifiers, building control, local authorities & insurers. Agrément Certificate 19/5657.
- EASY TO INSTALL – Our product is easy to use and requires only a drill and caulking gun for installation. Users should drill 12mm diameter holes horizontally into the mortar joint at a maximum of 120mm centres and to a depth of 10-20mm from the opposite face and 150mm above ground level. Salt contaminated plasterwork should be renewed. Comprehensive instructions are included within the kit.
- Shop Now
Rempro DPC Damp Proofing Course Cream Kit (10 x 400ml + Caulking Gun)- Barrier Treatment & Control of Rising Damp in Walls – BBA Certified
As low as£94.99- STOP RISING DAMP – Rempro DPC Cream is an advanced silicone emulsion cream specifically used to control rising damp in all types of masonry walls within properties. Once the cream has been injected into the wall, an effective physical barrier is created to prevent the effects of rising damp, typically known as a damp proof course.
- BBA CERTIFIED – This product has been extensively tested and approved by the BBA (British Board of Agrement) for use within both new and existing properties. The certification is a vital ingredient for acceptance with specifiers, building control, local authorities & insurers. Agrément Certificate 19/5657.
- EASY TO INSTALL – Our product is easy to use and requires only a drill and caulking gun for installation. Users should drill 12mm diameter holes horizontally into the mortar joint at a maximum of 120mm centres and to a depth of 10-20mm from the opposite face and 150mm above ground level. Salt contaminated plasterwork should be renewed. Comprehensive instructions are included within the kit.
- Shop Now
Rempro 100ml Anti-Mould Paint Additive – Prevention & Control of Black Mould Caused by Condensation & Damp
As low as£9.99- BLACK MOULD PREVENTION – Rempro Mould Paint Additive should be added to emulsion paint and applied to areas affected by the effects of condensation. It will prevent black grime from reoccurring on walls and ceilings. It is perfect for bathrooms, kitchens, areas of missing insulation and cold walls.
- NON-TOXIC CONTROL – Our paint additive is free from Biocide chemicals and made from natural organic products, including grapefruit extracts. This is a safer option for mould control within domestic properties and a preferred choice for painting contractors and housing associations.
- EASY TO APPLY – Users should add 100ml to 5 litres of standard emulsion paint and mix thoroughly until an even colour is achieved. Mixed paint should be applied as per original paint manufacturers instructions. Rempro is highly effective with a proven track record in the control of black mould.
- Shop Now
Rempro 2.5kg White Damp Proof Paint – Internal & External Liquid DPM for Water & Vapour Membrane Proofing Applications
As low as£45.99- DAMP BARRIER PAINT – A highly advanced styrene-butadiene rubber (SBR), liquid applied membrane paint. This water-based compound can be applied to damp concrete floor slabs, screeds and walls. Suitable for extensions, basements and cellars. Isolates damp substrates for new floor finishes including carpets and laminated flooring. The membrane dries to form a tough semi-gloss finish.
- USED BY PROFESSIONALS – Rempro damp proof paint can be used as a primary waterproofing barrier on new build basements before installing Ultra GEO membrane and land drain, respectively. This is a quick-drying paint that typically dries in 1 hour. In addition, damp Proofing paint is non-toxic, non-hazardous, solvent and plasticiser free.
- COVERAGE – A minimum dried coating thickness of 0.6mm is necessary to provide a vapour barrier. For the final dried membrane thickness, a coverage rate of 1.20kg/m² is required (two coats). This corresponds to approximately 1 litre/m². It is recommended that the coats be applied at right angles to each other.
